The G-Code Text Engraving program creates G Code in real time for the milling of text by CNC Routers.
Please note this program no longer supports the Imperial measurement system
The program uses any True Type font and ANY language copied and pasted into it, whereby
ANY language means for example Russian, Thai, Vietnamese, Tamil, Urdu, Korean, Japanese, Chinese and so on, seriously ANY.
It makes absolutely no difference what language the text is from.
Please note that the G-Code produced by this program is for an outline of the letters, and not single lines.
This program can also be switched to German.
Any True Type font can be used, this includes all the graphical fonts available
Here is a sample https://www.fonts2u.com/category.html?id=25
Graphical fonts can also be used
Here is a video demonstrating the capabilities of the software.There is no audio
G-Code Text Engraving Specs:-
Just 88 Kb
G Code is compiled in real time every time one of the input boxes is changed or an object is dragged by the mouse resulting in a real “What you see is what you get” development environment.
The angle of the text can be at anywhere from 0 to 360 degrees. I know 360 and 0 are the same but 359 looks weird..
The text can be flipped (mirrored) horizontally.
The height and width of the text can be adjusted at a resolution of 1 mm, i.e not limited to standard font sizes.
The text can be multi line, just type away in the input box and hit enter to start a new line, or simply paste whatever you want into the box from ANY source.
No annoying “Run, Compile, Generate, Build, Save, Merge” or who knows what else cycle.
Graphics reflect changes in real time.
Jobs can be moved exactly with cursor keys, input boxes, or dragged with the mouse pixel by pixel
G Code is copied to the computer clipboard and can be pasted into a simulator or milling machine directly.
No annoying dialog boxes to click away, all messages displayed in a text box.
Each job has its own properties, independent of the other jobs.
1000 + different jobs.
Things to know:-
Here is some sample G Code in metric,
Please note this program no longer supports Inch
Please try this on your machine as an air cut before buying.
Note that Z down is MINUS in this code and that the origin 0,0 is bottom left of screen.
The program code can use comma , or decimal point . by ticking the comma box shown below. This option was added recently and is not shown in the pictures above.
N1 G21 G40 G80 G90
N2 G00 Z15
N3 F500 M03 S1200
N4 G00 Z15
N5 G00 X100 Y100 F500
N6 T1 M06 (2 mm)
N7 G00 X80 Y129 Z0 F500
N9 G01 Z-0,3 F200
N10 G02 X80 Y129 I0.0 J-49
N11 G00 Z5
N12 G00 Z15
N13 M09 M30
N14 (###### End job 1 ######)
A 1.6 screen resolution ratio is best (screen width / screen height e.g 1680/1050 is 1.6)
or things may look distorted.
This program requires a monitor with at least 1450×1000 resolution
The program runs in:-
Windows XP, 7, 8, 10 (XP and Win 7 users will need to install the Dotnet framework 4.0, I will supply a link to this in any case, but it should already be integrated in Windows 8,10)
The program is 32 bit for maximum compatibility.
After purchase, the program will be available immediately for download.
Purchase the program here for 17 Euro with PayPal Secure Transaction
For any questions about the product, contact me at